HP DesignJet Z3200 Los Angeles, Orange County, Riverside County & San Bernardino County-Ca

Description

HP DesignJet Z3200 Plotter Repair Los Angeles, Orange County, San Bernardino County, Riverside County-USA

HP DesignJet Repair Company  is your LOCAL source for FAST onsite Designjet Z3200 Plotter wide format printer repair service.We  are certified to service HP Design Jet Wide Format printer in  Orange County, Los Angeles, Inland Empire , San Bernardino County, Riverside County in Southern California.

Whether you are printing maps, technical drawings or high quality design graphics you need a qualified
and  experienced plotter technician to diagnose and troubleshoot your issue.

 

HP Z2100, Z3100, Z3200 plotter description	DesignJet Z2100/Z3100/Z3200 plotter models service/maintenance
HP Designjet Z2100 Repair (24″)	Q6675A | Q6675AR | Q6675D
HP Designjet Z2100 GP Repair (24″)	Q6675B | Q6675BR
HP Designjet Z2100 Repair (44″)	Q6677A | Q6677AR | Q6677D
HP Designjet Z3100 Repair (24″)	Q5669A | Q5669AR
HP Designjet Z3100 GP Repair (24″)	Q5669B|Q5669BR
HP Designjet Z3100PS Repair (24″)	Q5670A|Q5670AR
HP Designjet Z3100 Repair (44″)	Q6659A| Q6659AR
HP Designjet Z3100PS GP Repair (44″)	Q6660A|Q6660AR
HP Designjet Z3200 Repair (24″)	Q6718B
HP Designjet Z3200PS Repair (24″)	Q6720B
HP Designjet Z3200 Repair (44″)	Q6719B
HP Designjet Z3200PS Repair (44″)	Q6721B

 

Continuable and non-continuable HP DesignJet error codes

Some error codes are continuable, which means that it is possible to press the Enter key on the front panel and to continue working with the printer. Non-continuable error codes do not allow work with the printer to continue.

Design-Jet Z2100/Z3100/Z3200 error messages	HP Design Jet Z2100/Z3200/Z3200 plotter Error Description
Designjet Z2100, Z3100, Z3200 Error 01.0:YZ	Communication with Main PCA failed Return to top of page.
Designjet Z2100, Z3100, Z3200 Error 01.1:YZ	Error in the Print Mech PCA Request a service/repair estimate.
Designjet Z2100, Z3100, Z3200 Error 01.2:YZ	Failure reading acumen chip of an Ink Supply Station.
Designjet Z2100, Z3100, Z3200 Error 01.3:YZ	Device I2C acumen Right Ink Supply Station failure.
Designjet Z2100, Z3100, Z3200 Error 02.1:YZ	Problem with the Carriage PCA.
Designjet Z2100, Z3100, Z3200 Error 03:YZ	Problem with Power Supply Unit.
Designjet Z2100, Z3100, Z3200 Error 03.0:10YZ	Battery of Real time clock ran down.
Designjet Z2100, Z3100, Z3200 Error 06:YZ	Failure reading/writing NVM in Hard disk.
Designjet Z2100, Z3100, Z3200 Error 08:YZ (or front panel is blank)	No communication between the Front Panel and the Main PCA
Designjet Z2100, Z3100, Z3200 Error 11:YZ	Trailing cable does not seem to be detected.
Designjet Z2100, Z3100, Z3200 Error 21:YZ	HP-GL/2 accessory card failure
Designjet Z2100, Z3100, Z3200 Error 21:YZ	Fail moving Service Station.
Designjet Z2100, Z3100, Z3200 Error 21.1:YZ	Fail moving the Primer Motor of the Service Station.
Designjet Z2100, Z3100, Z3200 Error 2x.n:10	Ink supply error found during IDS diagnostic test. The n represents the ink supply that is failing. The ink supply furthest to the left is always 0, and then they count up from left to right.
Designjet Z2100, Z3100, Z3200 Error 22.0:YZ	Left Ink Supply Station error
Designjet Z2100, Z3100, Z3200 Error 22.1:YZ	Left Ink Supply Station error.
Designjet Z2100, Z3100, Z3200 Error 22.2:YZ	Right Ink Supply Station error.
Designjet Z2100, Z3100, Z3200 Error 22.3:YZ	Right Ink Supply Station error.
Designjet Z2100, Z3100, Z3200 Error 24:YZ	Ink Setup failure (you must bring purge kit).
Designjet Z2100, Z3100, Z3200 Error 31:01	An error has been detected with the cutter.
Designjet Z2100, Z3100, Z3200 Error 31:02	An error has been detected with the cutter.
Designjet Z2100, Z3100, Z3200 Error 31:03	Paper is loaded. While testing the cutter, paper should not be loaded
Designjet Z2100, Z3100, Z3200 Error 41:03	Media-Axis Motor failure (likely due to friction or obstacles in the media path)
Designjet Z2100, Z3100, Z3200 Error 41:YZ	Media-Axis Motor failure (likely due to friction or obstacles in the media path).
Designjet Z2100, Z3100, Z3200 Error 42:03	Scan-Axis Motor failure (likely due to obstacles in the scan axis or electrical fault)
Designjet Z2100, Z3100, Z3200 Error 42:YZ	Scan-Axis Motor failure (likely due to friction or obstacles in the media path).
Designjet Z2100, Z3100, Z3200 Error 44:YZ	Fan electrical fault, or not connected.
Designjet Z2100, Z3100, Z3200 Error 47:03	Star wheels motor error
Designjet Z2100, Z3100, Z3200 Error 47:YZ	Star wheels motor error
Designjet Z2100, Z3100, Z3200 Error 48:YZ	PPS system failure.
Designjet Z2100, Z3100, Z3200 Error 48:00
Designjet Z2100, Z3100, Z3200 Error 51:YZ	Window Sensor failure
Designjet Z2100, Z3100, Z3200 Error 52:10	he printer has detected fibers in the Drop Detector.
Designjet Z2100, Z3100, Z3200 Error 55:YZ	Problem with the Line Sensor (Tetris). The printer has detected a failure to access Line Sensor EEPROM.
Designjet Z2100, Z3100, Z3200 Error 56:YZ	Drive roller analog encoder sensor fail or calibration failed.
Designjet Z2100, Z3100, Z3200 Error 58:YZ	The color sensor ESP (spectrophotometer) of the printer is not working well. It could be a problem with the spectrophotometer, a communication problem between the spectrophotometer and Carriage PCA or the color sensor shutter does not open properly.
Designjet Z2100, Z3100, Z3200 Error 61:YZ	The file format is incorrect and the Printer cannot process the job.
Designjet Z2100, Z3100, Z3200 Error 62:YZ	PC interface issue. Power on and off. Get the latest version of the firmware
Designjet Z2100, Z3100, Z3200 Error 63:YZ	nput /Output problem through the Network interface of the formatter.
Designjet Z2100, Z3100, Z3200 Error 64:YZ	Input / Output problem through the USB port
Designjet Z2100, Z3100, Z3200 Error 64:YZ	Input / Output problem through the USB port
Designjet Z2100, Z3100, Z3200 Error 65:YZ	Memory Driver Internal I/O error, I/O Socket Manager Internal I/O error
Designjet Z2100, Z3100, Z3200 Error 66:YZ	Cannot print file on current paper type. The paper type has changed since the file was sent, so the file cannot be printed on the paper type currently loaded.
Designjet Z2100, Z3100, Z3200 Error 67:YZ	nput – Output problem through a fire wire port.
Designjet Z2100, Z3100, Z3200 Error 68:YZ	Loss of engine counters tracking.
Designjet Z2100, Z3100, Z3200 Error 71:YZ	Out of memory failure.
Designjet Z2100, Z3100, Z3200 Error 71:19	Default Serial Number found in the main and backup NVM. It seems that both the Print Mech PCA and Hard Disk Drive have been replaced together.
Designjet Z2100, Z3100, Z3200 Error 72:YZ	Generic firmware error. Check that the printer has the latest firmware version – if not, update.
Designjet Z2100, Z3100, Z3200 Error 72:YZ	A service calibration must be performed. Check the internal error code to see which calibration must be performed. To check the internal error code, press UP and CANCEL together while the error code is displayed.
Designjet Z2100, Z3100, Z3200 Error 73:YZ	Server error
Designjet Z2100, Z3100, Z3200 Error 74:YZ	Error uploading firmware update file.
Designjet Z2100, Z3100, Z3200 Error 74.1:YZ	Error uploading media profile update file.
Designjet Z2100, Z3100, Z3200 Error 75.1:YZ	Preventative maintenance kit #1 counter active (Scan Axis Components, Ink supply tubes, trailing cable, carriage).
Designjet Z2100, Z3100, Z3200 Error 75.2:YZ	Preventative maintenance kit #2 counter active.
Designjet Z2100, Z3100, Z3200 Error 75.21:YZ	The spittoons (left spittoon, service station) are full.
Designjet Z2100, Z3100, Z3200 Error 75.22:YZ	Hard disk drive is full.
Designjet Z2100, Z3100, Z3200 Error 76:YZ	Web access application on the web server is not functioning correctly.
Designjet Z2100, Z3100, Z3200 Error 77:YZ	Borderless printing not possible. Setting ignored.
Designjet Z2100, Z3100, Z3200 Error 78:YZ	The job received cannot be printed without borders on this paper.
Designjet Z2100, Z3100, Z3200 Error 78:08	Media settings area missing in media settings file.
Designjet Z2100, Z3100, Z3200 Error 78:1:YZ	Generic Firmware error.
Designjet Z2100, Z3100, Z3200 Error 79:YZ	Generic Firmware error.
Designjet Z2100, Z3100, Z3200 Error 79.1:YZ	Recoverable firmware error that does not stop the printing process
Designjet Z2100, Z3100, Z3200 Error 81:YZ	Problem with paper advance.
Designjet Z2100, Z3100, Z3200 Error 81:YZ	This error can occur because the printer has been dropped during transportation, causing structural damage. Before continuing with the 81:YZ troubleshooting, first look for structural damage.
Designjet Z2100, Z3100, Z3200 Error 81.1:YZ	Problem finding the Drive Roller zero.
Designjet Z2100, Z3100, Z3200 Error 84:YZ	Back tension servo shutdown (roll feeding).
Designjet Z2100, Z3100, Z3200 Error 85:YZ	Problem finding the Drive Roller zero.
Designjet Z2100, Z3100, Z3200 Error 86:YZ	Possible paper jam
Designjet Z2100, Z3100, Z3200 Error 86:01	Problem moving the carriage, most likely due to a paper jam.
Designjet Z2100, Z3100, Z3200 Error 87:YZ	Problem finding the Scan-axis encoder reading.
Designjet Z2100, Z3100, Z3200 Error 93:YZ	Unable to pressurize the Ink Delivery System or the ISS Motor does not move as expected.
Designjet Z2100, Z3100, Z3200 Error 94:YZ	Color calibration error
Designjet Z2100, Z3100, Z3200 Error 94.1:YZ	Profiling algorithm failed.
Designjet Z2100, Z3100, Z3200 Error 98:YZ	Automatic backup print mode enabled

Common Problem Repairs HP Z3200 Designjet Printers 24″ 44″

1. Error Code 47:01 – Star Wheel bail arm was not moving up or down due to star wheel Motor
2. Error Code 41:01 – Electrical fault or current limit in Media-Axis Motor due to paper jam or 47:01 Error code
3. Error Code 03:10 – Noise coming from L/H side of printer with error – Need Power Supply.
4. Error Code 86:01 – Encoder strip (24″ Encoder”44″ Encoder) dirty need cleaning or replacing.
5. Error Code 86:01 – Scan-Axis Motor failure (likely due to obstacles in the scan axis or electrical fault).  Carriage belt (24″ Belt44″ Belt) worn or Scan Axis motor
6. Error Code 08:11 – No communication between the Front Panel and the Main PCA.
7. Not Cutting – Cutter needs cleaning.
8. Error Code 21:13 – Fail moving Service Station
9. Error Code 11:01 – Trailing cable issues (24″ Trailing Cable44″ Trailing Cable)

           To obtain a quotation for our repair services or maintenance Call 888-786-4270

HP DesignJet Z3200 belt kits are replaced, preventive maintenance provided, covers are cleaned, belt debris is removed and metal parts are lubricated on every HP plotter repair.