HP DesignJet Z5200 Repair Los Angeles, Orange County, San Bernardino County & Riverside County-Ca

Description

HP DesignJet Z5200 Plotter Repair Los Angeles, Orange County, San Bernardino County, Riverside County-USA

HP DesignJet Repair Company  is your LOCAL source for FAST onsite Designjet Z5200 Plotter wide format printer repair service.We  are certified to service HP Design Jet Wide Format printer in  Orange County, Los Angeles, Inland Empire , San Bernardino County Riverside County in Southern California

Whether you are printing maps, technical drawings or high quality design graphics you need a qualified and experienced plotter technician to diagnose and troubleshoot your issue.

We can service and repair your HP Designjet plotter quickly and at a fixed cost. Our expertise in plotter servicing and repairs will guarantee that you are  up and running in no time.

Designjet Z5200 plotter repair service includes :

1.   Internal cleaning of Service Station Assembly 2.   Cleaning of paper path including feed rollers 3.   Carriage Rails lubricated 4.   Cleaning of Drive Rollers 5.   Belt and Axis Motor checked 6.   Large and Small Idlers checked 7.   All printheads checked 8.   Platen cleaned 9.   Clean of Exterior 10.      Print Quality Test Printout

                       HP DesignJet Z5200 Belt Replacement

The most common HP DesignJet repair we carry out on-site is replacing a worn carriage belt that has caused a DesignJet to fail.

 

HP Z5200/Z5200ps HP DesignJet Plotter error code repair in Los Angeles, Orange County ,San Bernardino & Riverside County-Ca

HP Design Jet Plotter Error Codes Introduction:

System error codes consist of four digits that explain which component or system is failing and what action should be taken to correct the problem. The information below provides an explanation of the error and the recommended action to be taken.

Continuable and non-continuable HP DesignJet error codes

Some error codes are continuable, which means that it is possible to press the Enter key on the front panel and to continue working with the printer. Non-continuable error codes do not allow work with the printer to continue.

HP Z5200/Z5200PS ERROR MESSAGES	HP DESIGN JET Z5200/Z5200PS PLOTTER REPAIR DESCRIPTION
Designjet Z5200/Z5200ps repair Error 01.0:YZ	Communication with Main PCA failed Return to top of page.
Designjet Z5200/Z5200ps repair Error 01.1:YZ	Error in the Print Mech PCA Request a service/repair estimate.
Designjet Z5200/Z5200ps repair Error 01.2:YZ	Failure reading acumen chip of an Ink Supply Station.
Designjet Z5200/Z5200ps repair Error 01.3:YZ	Device I2C acumen Right Ink Supply Station failure.
Designjet Z5200/Z5200ps repair Error 02.1:YZ	Problem with the Carriage PCA.
Designjet Z5200/Z5200ps repair Error 03:YZ	Problem with Power Supply Unit.
Designjet Z5200/Z5200ps repair Error 03.0:10YZ	Battery of Real time clock ran down.
Designjet Z5200/Z5200ps repair Error 06:YZ	Failure reading/writing NVM in Hard disk.
Designjet Z5200/Z5200ps repair Error 08:YZ (or front panel is blank)	No communication between the Front Panel and the Main PCA
Designjet Z5200/Z5200ps repair Error 11:YZ	Trailing cable does not seem to be detected.
Designjet Z5200/Z5200ps repair Error 21:YZ	HP-GL/2 accessory card failure
Designjet Z5200/Z5200ps repair Error 21:YZ	Fail moving Service Station.
Designjet Z5200/Z5200ps repair Error 21.1:YZ	Fail moving the Primer Motor of the Service Station.
Designjet Z5200/Z5200ps repair Error 2x.n:10	Ink supply error found during IDS diagnostic test. The n represents the ink supply that is failing. The ink supply furthest to the left is always 0, and then they count up from left to right.
Designjet Z5200/Z5200ps plotter repair Error 22.0:YZ	Left Ink Supply Station error
Designjet Z5200ps /Z5200 plotter Error 22.1:YZ	Left Ink Supply Station error.
Designjet Z5200/Z5200ps repair Error 22.2:YZ	Right Ink Supply Station error.
DesignJet Z5200ps, Z5200 plotter error 22.3:YZ	Right Ink Supply Station error.
Designjet Z5200, HP Z5200ps plotter Error 24:YZ	Ink Setup failure (you must bring purge kit).
Designjet Z5200/Z5200ps repair Error 31:01	An error has been detected with the cutter.
Designjet Z5200, HP Z5200ps plotter Error 31:02	An error has been detected with the cutter.
Designjet Z5200/Z5200ps repair Error 31:03	Paper is loaded. While testing the cutter, paper should not be loaded
Designjet Z5200, HP Z5200ps plotter Error 41:03	Media-Axis Motor failure (likely due to friction or obstacles in the media path)
Designjet Z5200, HP Z5200ps plotter Error 41:YZ	Media-Axis Motor failure (likely due to friction or obstacles in the media path).
Designjet Z5200/Z5200ps repair Error 42:03	Scan-Axis Motor failure (likely due to obstacles in the scan axis or electrical fault)
Designjet Z5200, HP Z5200ps plotter error 42:YZ	Scan-Axis Motor failure (likely due to friction or obstacles in the media path).
Designjet Z5200/Z5200ps repair Error 44:YZ	Fan electrical fault, or not connected.
Designjet Z5200, HP Z5200ps plotter repair error 47:03	Star wheels motor error
Designjet Z5200/Z5200ps plotter repair Error 47:YZ	Star wheels motor error
Designjet Z5200/Z5200ps Error repair 48:YZ	PPS system failure.
Designjet Z5200/Z5200ps plotter repair Error 48:00
Designjet Z5200/Z5200ps plotter repair Error 51:YZ	Window Sensor failure
Designjet Z5200/Z5200ps plotter repair Error 52:10	he printer has detected fibers in the Drop Detector.
Designjet Z5200/Z5200ps repair Error 55:YZ	Problem with the Line Sensor (Tetris). The printer has detected a failure to access Line Sensor EEPROM.
Designjet Z5200/Z5200ps plotter repair Error 56:YZ	Drive roller analog encoder sensor fail or calibration failed.
Designjet Z5200, Design Jet Z5200ps 44-inch plotter repair Error 58:YZ	The color sensor ESP (spectrophotometer) of the printer is not working well. It could be a problem with the spectrophotometer, a communication problem between the spectrophotometer and Carriage PCA or the color sensor shutter does not open properly.
Designjet Z5200/Z5200ps 44″ plotter Error 61:YZ	The file format is incorrect and the Printer cannot process the job.
Designjet Z5200/Z5200ps plotter repair Error 62:YZ	PC interface issue. Power on and off. Get the latest version of the firmware
Designjet Z5200/Z5200ps 44- inch plotter Error 63:YZ	nput /Output problem through the Network interface of the formatter.
Designjet Z210Z5200/Z5200ps plotter repair Error 64:YZ	Input / Output problem through the USB port
Designjet Z5200, HP Z5200ps plotter repair Error 64:YZ	Input / Output problem through the USB port
Designjet Z5200, HP Z5200ps plotter repair error 65:YZ	Memory Driver Internal I/O error, I/O Socket Manager Internal I/O error
Designjet Z5200, HP Z5200ps 44-inch plotter repair Error 66:YZ	Cannot print file on current paper type. The paper type has changed since the file was sent, so the file cannot be printed on the paper type currently loaded.
Designjet Z5200, HP Z5200ps plotter repair Error 67:YZ	nput – Output problem through a fire wire port.
Designjet Z5200, HP Z5200ps plotter repair Error 68:YZ	Loss of engine counters tracking.
DesignjetZ5200, HP Z5200ps plotter repair Error 71:YZ	Out of memory failure.
Designjet Z5200/Z5200ps plotter repair Error 71:19	Default Serial Number found in the main and backup NVM. It seems that both the Print Mech PCA and Hard Disk Drive have been replaced together.
Designjet Z5200/Z5200ps plotter repair Error 72:YZ	Generic firmware error. Check that the printer has the latest firmware version – if not, update.
Designjet Z5200/Z5200ps plotter repair Error 72:YZ	A service calibration must be performed. Check the internal error code to see which calibration must be performed. To check the internal error code, press UP and CANCEL together while the error code is displayed.
Designjet Z5200/Z5200ps printer Error 73:YZ	Server error
Designjet Z5200/Z5200ps printer Error 74:YZ	Error uploading firmware update file.
Designjet Z5200/Z5200ps printer Error 74.1:YZ	Error uploading media profile update file.
Designjet Z5200/Z5200ps plotter Error 75.1:YZ	Preventative maintenance kit #1 counter active (Scan Axis Components, Ink supply tubes, trailing cable, carriage).
Designjet Z5200/Z5200ps Error 75.2:YZ	Preventative maintenance kit #2 counter active.
Designjet Z5200/Z5200ps Error 75.21:YZ	The spittoons (left spittoon, service station) are full.
Designjet Z5200/Z5200ps Error 75.22:YZ	Hard disk drive is full.
Designjet Z5200/Z5200ps repair Error 76:YZ	Web access application on the web server is not functioning correctly.
Designjet Z5200/Z5200ps repair Error 77:YZ	Borderless printing not possible. Setting ignored.
Designjet Z5200/Z5200ps repair Error 78:YZ	The job received cannot be printed without borders on this paper.
DesignjetZ5200/Z5200ps repair Error 78:08	Media settings area missing in media settings file.
Designjet Z5200/Z5200ps repair Error 78:1:YZ	Generic Firmware error.
Designjet Z5200/Z5200ps plotter repair error 79:YZ	Generic Firmware error.
Designjet Z5200/Z5200ps plotter repair Error 79.1:YZ	Recoverable firmware error that does not stop the printing process
Designjet Z5200/Z5200ps plotter repairError 81:YZ	Problem with paper advance.
DesignjetZ5200/Z5200ps plotter repair Error 81:YZ	This error can occur because the printer has been dropped during transportation, causing structural damage. Before continuing with the 81:YZ troubleshooting, first look for structural damage.
Designjet Z5200/Z5200ps plotter repair Error 81.1:YZ	Problem finding the Drive Roller zero.
Designjet Z5200/Z5200ps plotter repair Error 84:YZ	Back tension servo shutdown (roll feeding).
Designjet Z5200/Z5200ps plotter repair Error 85:YZ	Problem finding the Drive Roller zero.
DesignjetZ5200/Z5200ps plotter repair Error 86:YZ	Possible paper jam
DesignjetZ5200/Z5200ps plotter repair Error 86:01	Problem moving the carriage, most likely due to a paper jam.
Designjet Z5200/Z5200ps plotter repair Error 87:YZ	Problem finding the Scan-axis encoder reading.
Designjet Z5200/Z5200ps plotter repair Error 93:YZ	Unable to pressurize the Ink Delivery System or the ISS Motor does not move as expected.
Designjet Z5200/Z5200ps plotter repair Error 94:YZ	Color calibration error
Designjet Z5200/Z5200ps plotter repair Error 94.1:YZ	Profiling algorithm failed.
Designjet Z5200/Z5200ps plotter repair Error 98:YZ	Automatic backup print mode enabled.